Sennheiser S-MCD 3000 HP - Manual (Page 59)

59
1 Receiver address:
Enter the current receiver in the “Receiver address” field. In the “Panel design” field you can select
the design which you would like to allocate to the panel.
2 Actor name:
Here you can enter the name of the actor in question. In this way you always know which receiver
belongs to which person.
3 Get Freq. list:
The “Get Freq. list” button allows you to display all frequencies stored in the receiver.
4 Show Address:
With the “Show Address” command in the “System Info” field, you instruct the receivers to display
their own address in their LC display. The receiver display is reset via the command “Reset” in the
same field.
5 Get Addresses:
The “Get Addresses” command in this field displays all existing addresses in the right-hand text
field.