Sennheiser S-MCD 3000 HP - Manual (Page 75)

75
3 Altering the display range
In order to alter the display range of a measuring curve, it is necessary to activate the markers. For this
purpose, press the “Marker On/Off” button.
Two markers appear on the left-hand and right-hand side of the display range. In addition, the information
fields “x-axis”, “RF 1” and “RF 2” are activated. These give the current position of the markers and
their measured values at this location.
Alter the position of the markers with the help of the arrow keys on the right of the “Marker On/Off”
button.