Video or s-video signal sele, Component signal selection, Video or s-video signal selection – Sanyo PLC-EF60 User Manual

Page 40

Advertising
background image

40

System

AV System Menu (Video or S-Video)

AV System Menu (Component)

If the projector cannot reproduce proper video image, it is
necessary to select a specific broadcast signal format among PAL,
SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.

Move the yellow
frame pointer to a
system and press
the SELECT button
to activate it.

PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N

The projector automatically detects incoming video signal, and
adjusts itself to optimize its performance.

If the projector cannot reproduce proper video image, it is
necessary to select a specific component video signal format
among 480i, 575i, 480p, 575p, 720p, 1035i, 1080i/50 and 1080i/60.

Auto

COMPONENT VIDEO SIGNAL FORMAT

Component Signal Selection

The projector automatically detects incoming video system, and
adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select system manually.

Auto

Move the pointer to
a system and press
the SELECT button
to activate it.

Note:

When Auto is selected for the System menu, PAL-M and PAL-N cannot be selected.

Video or S-Video Signal Selection

Advertising
This manual is related to the following products: