Sony TAV-L1 - Manual (Page 20)

20 US
To prevent the system from toppling over
Notes
• Be sure to take measures to prevent the system from
toppling over. If you fail to do so, the system may
topple over and cause injury. Anchor the system to a
wall, pillar, etc., to prevent it from toppling over.
• Any wall alternations (drilling, etc.) are your own
responsibility.
Prepare a commercially available strong rope or chain
and wall anchor bracket beforehand.
1
Attach the two screws to the screw holes
on the rear of the system.
2
Secure the wall anchor bracket to a wall
or pillar.
3
Thread the rope or chain through both
holes of the screws, and then tighten the
other end of the rope or chain to the wall
anchor bracket.
A commercially available
strong rope or chain
A commercially
available wall
screw