Sony TAV-L1 - Manual (Page 68)

68 US
(AUDIO DRC)
Narrows the dynamic range of a Dolby Digital sound
track. Useful for watching movies at low volume late
at night.
1
Press DVD (FUNCTION) to switch the
remote FUNCTION to DVD.
2
Press AMP MENU.
3
Press M/m repeatedly until “AUDIO DRC”
appears in the front panel display, then
press
(ENTER) or ,.
4
Press M/m to select the setting.
• “DRC OFF”: No compression of dynamic range.
• “DRC STD”: Reproduces the sound track with
the kind of dynamic range that the recording
engineer intended.
• “DRC MAX”: Compresses dynamic range fully.
5
Press (ENTER).
The setting is selected and setup is complete.
Note
AUDIO DRC only applies to Dolby Digital sources.
(DUAL MONO)
You can play bilingual broadcasts recorded on
DVD-R/DVD-RWs in VR mode.
Note
This setting works for the DVD function only.
1
Press DVD (FUNCTION) to switch the
remote FUNCTION to DVD.
2
Press AMP MENU.
3
Press M/m repeatedly until “DUAL MONO”
appears in the front panel display, then
press
(ENTER) or ,.
4
Press M/m to select the sound you want.
• “MAIN”: Main sound is output from the left and
right speakers.
• “SUB”: Sub sound is output from the left and
right speakers.
• “MAIN+SUB”: Main sound and Sub sound are
output from the left and right speakers.
• “MAIN/SUB”: Main sound is output from the
left speaker and Sub sound is output from the
right speaker.
5
Press (ENTER).
The setting is selected and setup is complete.
Enjoying the sound at low volume
AMP MENU
M/m/,/ (ENTER)
With cover opened.
DVD
Enjoying a bilingual DVD disc
AMP MENU
M/m/,/ (ENTER)
With cover opened.
DVD