Sony TAV-L1 - Manual (Page 26)

26 US
Using other equipment
with your remote
control
To operate other connected equipment with your
system, first turn to page 25 and program the
necessary code. For operating other equipment, press
INPUT or direct input select button repeatedly until
you see the input on the screen for your connected
equipment. Remote control operation tips are
provided below.
Note
Some functions cannot be operated depending on the
equipment. In that case, operate by the remote control
supplied with the equipment.
Operating a Cable Box
Operating a Satellite Receiver
VIDEO 5 (HDMI IN):
Digital audio/video signal is input through the VIDEO 5
(HDMI IN) jack. Audio input signal is analogue only if
the equipment has been connected using the DVI and
audio out jack.
VIDEO 6 (PC IN):
RGB input signal through the PC connectors VIDEO 6
(PC IN), and audio input signal through the jack PC
AUDIO IN.
To Do This ... Press ...
Activate the remote control to
operate the cable box
CABLE (FUNCTION)
Turn on/off POWER
Select a channel 0-9, ENT,
Change channels CH +/–
Display cable menu MENU
Display channel number DISPLAY
Move highlight (cursor) </M/m/,
Select item (OK)
To Do This ... Press ...
Activate the remote control to
operate the satellite receiver
SAT(FUNCTION)
Turn on/off POWER
Select a channel 0-9, ENT,
Change channels CH +/–
Back to previous channel JUMP
Display channel number DISPLAY
Display SAT Guide GUIDE
Display SAT Menu MENU
Move highlight (cursor) </M/m/,
Select item (OK)