Sony AT107 - Manual (Page 26)

26
Progressive
When you connect a progressive format
TV to this recorder using the
COMPONENT VIDEO OUT jacks,
select “Compatible.”
Standby Mode (page 118)
Select the mode for when the recorder is
turned off.
• “Mode 1” (default): No input signals
are output when the recorder is in
standby mode.
• “Mode 2”: Input signals are output
when the recorder is in standby mode.
When you select “Mode 1,” the display
asks for confirmation. Select
“Yes(Mode 2)” or “No(Mode 1).”
HDD caution messages
Read the HDD caution messages, and
press ENTER.
4
Select “Finish Setup” using M/m,
and press ENTER.
“Easy Setup” is completed.
Go to “Setting up the GUIDE Plus+
®
system (RDR-AT105/AT107/AT205
only)” (page 26) to use the Gemstar
GUIDE Plus+ electronic programme
guide.
To return to the previous step
Press O RETURN.
z Hint
If you want to run “Easy Setup” again, select
“Easy Setup” in the “Basic” setup from “Initial
Setup” in the System Menu (page 118).
Follow the instructions below to set up the
GUIDE Plus+ system and use the connected
set top box receiver.
1
Press GUIDE.
The GUIDE Plus+ system “Basic
Setup” appears.
2
Select an item using M/m, and press
ENTER. Then set each item.
Language
Select a language for the on-screen
displays using
M/m, and press ENTER.
Country
Select a country/area using M/m, and
press ENTER.
Postal Code
Enter your postal code using </M/m/
,, and press ENTER.
If “Country” is set to “Others,” you
cannot enter a postal code and the
GUIDE Plus+ system will not search for
a host channel.
• If you do not need to set up the GUIDE
Plus+ system, press SYSTEM MENU
to exit.
• Even if you cannot use the GUIDE
Plus+ system where you live, you can
still set up a manual recording. See
“Setting the timer manually
(Schedule)” on page 54.
Setting up the GUIDE Plus+
®
system (RDR-AT105/AT107/
AT205 only)