Sony AT107 - Manual (Page 32)

32
Connecting an External Decoder
You can watch or record external decoder (PAY-TV/Canal Plus analogue decoder)
programmes if you connect a decoder (not supplied) to the recorder. Disconnect the recorder’s
mains lead from the mains when connecting the decoder.
To watch the connected external decoder (PAY-TV/Canal Plus analogue decoder)
programmes while the recorder is in standby mode, set “Standby Mode” to “Mode 2” in the
“Basic” setup (page 118). If not, the picture will not appear.
Note that when you set “LINE 1 In” to “Decoder” in step 7 of “Setting external decoder (PAY-
TV/Canal Plus analogue decoder) programme positions” (page 33), you will not be able to
select “L1” because Line 1 will become a dedicated line for the decoder.
Connecting a decoder
TV
Aerial cable
(supplied)
SCART cord
(not supplied)
External decoder (PAY-TV/
Canal Plus analogue decoder)
to AERIAL OUT to i LINE 1/DECODER
DVD recorder
to AERIAL IN
to SCART input
SCART cord
(not supplied)
to T LINE 3 – TV