Sennheiser 2015 - Manual (Page 10)

62
Indications and displays on the receiver
Battery status indication
The 4-step battery status display ቦ on the display panel and the red LED ᕤ
provide information on the capacity of the BA 2015 battery pack or the bat-
teries:
Warning indication for missing RF signal
The red LED ᕤ lights up constantly when no RF signal is being received, e.g.
because the microphone of the transmitter is muted.
Audio signal indication
The green LED ᕥ lights up when an audio signal of sufficient strength (e.g.
the voice of the speaker) is being received.
Alphanumeric display
After switching on the receiver, the alphanumeric display ቢ first displays
the name of the receiver. After approx. three seconds, the standard display
appears, indicating the channel bank (1) and the channel (01).
ᕤ
ᕥ
ቦ
3 segments: capacity approx. 100 %
2 segments: capacity approx. 70 %
1 segment: capacity approx. 30 %
Battery status display
and red LED flashing: LOW BAT (you should immediately
replace the battery pack or the batteries)
ቢ