Sennheiser 2015 - Manual (Page 24)

76
Using the transmitter
Switching the transmitter on/off
̈ Press the ON / OFF button ¹ to switch the transmitter on. The name of
the transmitter is displayed for approx. three seconds and then
switches to the standard display.
̈
To switch the transmitter off, press the ON / OFF button ¹ until “OFF”
appears on the display.
Note:
The transmitter can only be switched off when the standard display is
shown on the display panel. When in the operating menu, briefly pres-
sing the
ON / OFF button will cancel your entry (ESC function) and return
you to the standard display with the last stored settings.
Muting the microphone
The transmitter has a MUTE ƹ switch that noiselessly mutes the trans-
mitted microphone signal. This switch does not switch off the transmit-
ter.
̈ Set the MUTE switch to the position “MUTE”. The red LED ᕤ lights up.
̈ Set the MUTE switch back to the original position to activate the micro-
phone signal.
¹
ƹ
¿