Timer operations – Sharp FO-4650 User Manual

Page 104

Advertising
background image

Timer Operations

102

Timer Operations

The Timer function allows you to set up an operation to be performed
automatically at a specified time. Up to 48 operations can be set at any
one time, and the time of each can be set up to a week in advance.

You can use this function to take advantage of lower off-peak rates
without having to be there when the operation is performed.

Note: The DOCUMENT key cannot be used for a timer transmission.

Initial procedure

To set a timer operation, first perform the following procedure. After
you have completed this procedure, go to the procedure for the
specific operation you want to set (see the following pages).

1

Press the TIMER key.

The display will show:

2

Press 1 to select SET.

TIMER MODE
1=SET, 2=CLEAR

3

Press the

* key or the # key until the

desired operation appears in the
display.

Transmission (SEND MODE)
Confidential transmission
Polling
Serial Polling
Broadcasting
Relay Request

1

T

TIMER

all-FO4700.book Page 102 Tuesday, November 28, 2000 2:07 PM

Advertising
This manual is related to the following products: