Sharp FO-4650 - Manual (Page 68)

66
4. Making Copies
Your fax machine can also be used to make copies. Single and
multiple copies (up to 99 per original) can be made, enabling the fax
machine to double as an office copier.
♦ You can perform all steps of a copy operation even when the fax
machine is busy printing other copy jobs, or when it is printing a
received document after the line has been disconnected. Your copy
job will be automatically stored in memory and then printed when
all previous printing jobs are completed.
♦ The default resolution for copying is FINE. If desired, you can
change the default resolution to SUPER FINE by changing Option
Setting 32 (see Chapter 6, Optional Settings).
1
Load the document.
• SEND READY will appear in the
display.
• If desired, adjust the resolution and/
or contrast.
2
Press the COPY key.
The display will show:
• If you are only making a single
copy of the original (or of each
original), press the START key.
Copying will begin.
COPY MODE
ENTER #(01-99) 01
RESOLUTION
Q
CONTRAST
COPY
all-FO4700.book Page 66 Tuesday, November 28, 2000 2:07 PM