The housing, Replacing the verification stamp – Sharp FO-4650 User Manual

Page 165

Advertising
background image

The Housing

163

8. Maintenanc

e

The Housing

Wipe the external parts and surface of the machine with a dry cloth.

Caution!
Do not use benzene or thinner. These solvents may damage or
discolor the machine.

Replacing the Verification Stamp

If you are using the Verification Stamp function, you will need to
replace the ink cartridge in the stamp unit when it runs out of ink
(when the stamped mark on original documents becomes faint). A
new ink cartridge can be obtained from your dealer.

1

Remove the original document OUT
tray.

2

Press down on the protruding tab of
the green ink cartridge and pull the
cartridge out with your fingers.

all-FO4700.book Page 163 Tuesday, November 28, 2000 2:07 PM

Advertising
This manual is related to the following products: