Schumacher Manual Battery Charger SWI-1224 - Manual (Page 41)

• 37 •
ASSEMBLY INSTRUCTIONS 10.
It is important to fully assemble your charger before use. Remove all cord wraps 10.1
and uncoil the cables prior to using the battery charger. Follow these instructions for
assembly.
PARTS TOOLS NEEDED
(2) 10-32, thread cutting screws
(4) ¼-20, thread cutting screws
(4) Phillips head sheet metal screws
(2) wheels
(1) axle
(2) axle caps
(2) axle brackets
(1) handle
(1) foot 3/8” wrench (for mounting foot)
5/16” wrench (for mounting wheels)
hammer
screwdriver (flat blade)
screwdriver (Phillips)
Attach the Foot: 10.2 Remove the charger from the packing materials and place upside
down on a flat surface. Attach the foot and secure it with the four ¼-20 thread cutting
screws provided.