Configuring community names, Configuring community names -20 – SMC Networks TigerStack 100 1000BASE-X User Manual
Page 38
U
SING
THE
S
YSTEM
C
ONFIGURATION
P
ROGRAM
2-20
Configuring Community Names
The following figure and table describe how to configure the community
strings authorized for management access. Up to 5 community names may
be entered.
Note: The default community string is “public” with Read/Write access.
SNMP Configuration : SNMP Communities
=====================================
Community Name
Access
Status
1.
public
READ/WRITE
ENABLED
2.
3.
4.
5.
<APPLY>
<OK>
<CANCEL>
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter
Description
Community Name
A community entry authorized for management access.
Maximum string length : 20 characters
Access
Management access is restricted to Read Only or Read/
Write.
Status
Sets administrative status of entry to enabled or
disabled.