SMC Networks TigerStack 100 1000BASE-X - Manual (Page 53)

C
ONFIGURING THE
S
WITCH
2-35
Parameter Default Description
Spanning Tree
Protocol
Enabled Enable this parameter to participate in a STA
compliant network.
Priority 32,768 Device priority is used in selecting the root device,
root port, and designated port. The device with the
highest priority becomes the STA root device.
However, if all devices have the same priority, the
device with the lowest MAC address will then
become the root device.
Enter a value from 0 - 65535.
Remember that the lower the numeric value, the
higher the priority.
Hello Time 2 Time interval (in seconds) at which the root device
transmits a configuration message.
The minimum value is 1.
The maximum value is
the lower of 10 or [(Max. Message Age / 2) -1].