SMC Networks TigerStack 100 1000BASE-X - Manual (Page 39)

M
ANAGEMENT
S
ETUP
M
ENU
2-21
Configuring IP Trap Managers
The following figure and table describe how to specify management
stations that will receive authentication failure messages or other trap
messages from the switch. Up to 5 trap managers may be entered.
SNMP Configuration : IP Trap Managers
=====================================
IP Address Community Name Status
1. 10.1.0.23 Public DISABLED
2.
3.
4.
5.
<APPLY> <OK> <CANCEL>
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter Description
IP Address IP address of the trap manager.
Community Name A community specified for trap management access.
Status Sets administrative status of selected entry to enabled or
disabled.