Sony SCPH-50011 - Manual (Page 2)

2
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To avoid electrical shock, do not disassemble.
Refer servicing to qualified personnel
only.
Caution
The use of optical instruments with this
product will increase eye hazard. As the
laser beam used in this unit is harmful to
eyes, do not attempt to disassemble the
cabinet.
Refer servicing to qualified personnel only.
This label is located on the Laser protective housing inside
the enclosure of the PlayStation
® 2 console.
This graphical symbol with supplemental marking is
located on the right surface of the PlayStation
® 2 console
(when it is in a vertical position).
This symbol is intended to alert the user to the
presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
This symbol is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the console.
Caution
TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
WARNING
Before operating your PlayStation ® 2
console
A very small percentage of individuals may experience
epileptic seizures when exposed to certain light patterns or
flashing lights. Exposure to certain patterns or back-
grounds on a television screen or while playing video
games, including games played on the PlayStation
® 2
console, may induce an epileptic seizure in these
individuals. Certain conditions may trigger previously
undetected epileptic symptoms even in persons who have
no history of prior seizures or epilepsy.
If you, or anyone in your family, has an epileptic
condition, consult your physician prior to playing. If you
experience any of the following symptoms while playing a
video game - dizziness, altered vision, eye or muscle
twitches, loss of awareness, disorientation, any involun-
tary movement, or convulsions - IMMEDIATELY
discontinue use and consult your physician before
resuming play.
Information
If this equipment causes harmful interference to radio or
television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and
receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV
technician for help.
Owner’s record
The model and serial numbers of the PlayStation ® 2
console are located on the rear of the console (when placed
in the horizontal position). Record the serial number in the
space provided below. Refer to these numbers whenever
you call for technical assistance at 01-800-759-7669 or 5002-
9819.
Model No.
SCPH-50011
Serial No.
___________________________
Some PlayStation ® format software titles may perform
differently on the PlayStation ® 2 console than they did on
the PlayStation ® console, or may not perform properly on
the PlayStation ® 2 console. For more information, call our
technical support line at 01-800-759-7669 or 5002-9819.
This product may fall within the scope of national export
control legislation. You must comply fully with the
requirements of such legislation and of all other applicable
laws of any jurisdiction in relation to this product.