Sony SCPH-50011 - Manual (Page 21)

21
US
DVD videos
To set Repeat Play when a disc is not
playing
Use the directional buttons to select the
(Repeat) icon, and press the
✕ button until the
Repeat mode you want is displayed. Use the
directional buttons to select the N (Play) icon,
and press the
✕ button. Repeat Play begins.
Notes
• A-B Repeat is cleared when Repeat Play is set.
• Repeat Play may not be available on some discs.
• Repeat Play is cleared when:
– A-B Repeat is set.
– The disc tray is opened using the A button on the
console front.
– The console is reset or goes into standby mode after
the 1/reset button has been pressed.
– The power is turned off using the main power
switch on the console rear.
Repeated playback of a
selected scene (A-B Repeat)
You can set a specific section of the disc to be
repeatedly played back.
1
During playback, use the
directional buttons to select the
(A-B Repeat) icon, and press
the ✕ button at the point you
want to start repeated playback.
The starting point (point A) is set.
2
Use the directional buttons to
select the
(A-B Repeat) icon,
and press the ✕ button at the
point you want to end repeated
playback.
The ending point (point B) is set, and
repeated playback of the section from
A to B begins.
Notes
• A-B Repeat Play may not be available on some discs or
some sections of a disc.
• The A-B Repeat function can be set for only one section
at a time.
• A-B Repeat cannot be set to select a section of video
from more than one title.
• A-B Repeat is cleared when:
– Program Play, Shuffle Play, or Repeat Play has been
set
– Playback has been stopped.
– The DVD disc menu is displayed.
– The disc tray is opened using the A button on the
console front.
– The console is reset or goes into standby mode after
the 1/reset button has been pressed.
– The power is turned off using the main power
switch on the console rear.
• When A-B Repeat is set, Program Play, Shuffle Play,
and Repeat Play are cleared.
Selecting Original/Play List for
DVD-RW playback
DVD-RW discs (VR mode) can play back both
original content recorded using a DVD
recorder, and Play List content created by
editing original content. When using this kind
of disc you can select the type of title you want
to play.
This setting is not available during Resume
Play.
Stop playback, and use the directional buttons
to select the
(Original/Play List) icon.
Then press the ✕ button.
Original and Play List will be selected in turn
each time you press the
✕ button.
•Original: Playback of originally recorded
content.
•Play List: Playback of edited content.
Notes
• The default setting for this option is Play List.
• Note that you cannot record or edit content using this
console.
• If a disc has no Play List, the original content will be
played back. Play List cannot be selected.
• A-B Repeat cannot be set to select a section of video
from more than one title.
• Slow-motion play (in reverse) is not available for DVD-
RW discs (VR mode).
• The “Original” setting is cleared when:
– The disc tray is opened using the A button on the
console front.
– The console is reset or goes into standby mode after
the 1/reset button has been pressed.
– The power is turned off using the main power
switch on the console rear.
• Content recorded on DVD-RW discs in VR mode must
be finalized to be viewed on the PlayStation ® 2 console.