Sony TC-TX373 - Manual (Page 8)

8
The remote supplied with the
DHC-MD333
FUNCTION
1
TAPE x
TAPE X
VOLUME
TAPE h/H
TAPE m/M
1
Press `/1 (power) on the
DHC-MD373/333 to turn on the
DHC-MD373/333 component system.
The tape deck turns on automatically.
2
Insert a recorded tape.
Playing a tape (continued)
With the side you
want to play facing up
3
Set DIRECTION to g to play one
side. Set it to s
3) to play both sides.
4
Press H.
Press h to play the bottom side.
FUNCTION switches to “TAPE”
automatically, then the tape starts playing.
3) The tape deck stops automatically after repeating
the sequence five times.
To play a tape using the
DHC-MD373 component system
Do the following operation in step 4.
1 Press TAPE so that “TAPE” appears in the
display.
2 Press H on the remote.
To play the bottom side, press H again.
To play a tape using the
DHC-MD333 component system
Do the following operation in step 4.
1 Press FUNCTION until “TAPE” appears in the
display.
2 Press TAPEH on the remote.
To play the bottom side, press TAPEh on the
remote.