Sony CMT-DC500MD - Manual (Page 14)

14
4
Enter a character.
If you have selected uppercase or
lowercase letters
1 Press the corresponding letter button
repeatedly until the character to be
entered flashes.
Or, press the button once and press .
or > on the remote repeatedly.
2 Press CURSOR t on the remote.
The flashing character is entered and the
cursor shifts to the right.
If you have selected numbers
Press the corresponding number button.
The number is entered and the cursor shifts
to the right.
To enter a blank space
1 Press NAME EDIT/SELECT on the
remote to select upper case or lower
case letters.
2 Press 10/0 on the remote.
A blank space is entered and the cursor
shifts to the right.
5
Repeat steps 3 and 4 to enter the rest
of the name.
To change a character
Press TCURSOR or CURSORt on the
remote repeatedly until the character to be
changed flashes, press CLEAR on the
remote to erase the character, then repeat
steps 3 and 4.
6
Press ENTER/YES on the remote to
complete the labelling procedure.
To cancel labeling
Press MENU/NO on the remote.
Labeling a CD (continued) Checking the disc titles
1
Press MENU/NO on the remote in stop
mode.
2
Press . or > on the remote
repeatedly until “Name Check ?”
appears, then press ENTER/YES on the
remote.
3
Press . or > on the remote
repeatedly to select the disc titles
stored in the system memory between
01 and 50.
To check the current disc title
Press SCROLL on the remote in stop mode.
Erasing a disc title
1
Press MENU/NO on the remote in stop
mode.
2
Press . or > on the remote
repeatedly until “Name Erase ?”
appears, then press ENTER/YES on the
remote.
3
Press . or > on the remote
repeatedly to select the disc name to be
erased.
4
Press ENTER/YES on the remote again.
“Complete !” appears.
To erase all disc titles, press . or > on
the remote repeatedly until “All Erase ?”
appears in step 2, then press ENTER/YES on
the remote twice.
To cancel erasing
Press MENU/NO on the remote.
Note
The disc titles are saved in the systems memory for
about a day even if you disconnect the power cord or
a power failure occurs.