Sony CMT-DC500MD - Manual (Page 29)

29
MD — Editing
Erasing recordings
— Erase Function
The MD deck lets you erase unwanted tracks
quickly and easily.
The three options for erasing recordings are:
• Erasing a single track (Track Erase Function)
• Erasing all tracks (All Erase Function)
• Erasing a portion of a track (A-B Erase
Function)
Erasing a single track
— Track Erase Function
You can erase a track simply by selecting its
track number. When you erase a track, the total
number of tracks on the MD decreases by one
and all the tracks following the erased one are
renumbered.
Example: Erasing track 2.
1 2 3
1 2 3
4
A C D
A C D
B
1
Press MD on the remote to switch the
function to MD.
2
Press MENU/NO on the remote to
display “Edit Menu”.
3
Press . or > on the remote
repeatedly until “Tr Erase?” appears,
then press ENTER/YES on the remote.
Erase track 2
Track
number
Original
tracks
After
ERASE
4
Press . or > on the remote
repeatedly until the desired track
number appears.
5
Press ENTER/YES on the remote.
“Complete !” appears.
Note
“Erase???” appears when the track was recorded or
edited on another deck and then protected. To erase
the track, press ENTER/YES on the remote while
“Erase???” appears.
Erasing all tracks
— All Erase Function
You can erase the disc title, all recorded tracks
and their titles at once.
1
Press MD on the remote to switch the
function to MD.
2
Press MENU/NO on the remote to
display “Edit Menu”.
3
Press . or > on the remote
repeatedly until “All Erase ?” appears,
then press ENTER/YES on the remote.
“All Erase ??” appears.
4
Press ENTER/YES on the remote again.
“Complete !” appears.
continued