Sony CMT-DC500MD - Manual (Page 55)

55
Additional Information
TUNER
Cannot Edit
You tried to label or erase a non-preset station.
CD
Cannot Edit
You tried to label a CD TEXT disc.
CD No Disc
There is no CD in the player.
Name Full
There are already 50 disc titles stored in the
system.
OVER
You have reached the end of the CD while keeping
pressing CD M during play or pause.
Step Full!
You try to program 26 or more tracks (steps).
TAPE
Cannot SYNC
There is no tape in the tape deck, or the tab has
been removed from the cassette.
No Tab
You cannot record the tape because the tab has
been removed from the cassette.
No Tape
There is no tape in the tape deck.
Specifications
Amplifier section
European model:
DIN power output (rated): 30 + 30 W
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference):
35 + 35 W
(6 ohms at 1 kHz, 10%
THD)
Music power output (reference):
85 + 85 W
Other models:
The following measured at 230 V AC, 60 Hz
DIN power output (rated): 30 + 30 W
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference):
35 + 35 W
(6 ohms at 1 kHz, 10%
THD)
The following measured at 220 V AC, 60 Hz
DIN power output (rated): 24 + 24 W
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference):
27 + 27 W
(6 ohms at 1 kHz, 10%
THD)
Inputs
ANALOG IN (phono jacks):
Sensitivity 250 mV,
impedance 47 kilohms
DIGITAL OPTICAL IN (Supported sampling
frequencies: 32 kHz, 44.1 kHz and 48 kHz)
Outputs
PHONES (stereo minijack):
Accepts headphones with
an impedance of 8 ohms
or more
SPEAKER: Accepts impedance of 6 to
16 ohms
continued