Sony STR-DE998 - Manual (Page 18)

masterpage:Left
lename[E:\SEM_Janet\Data_DE998\J9041624_2580804111DE998U\2580804111\GB03CON_
STR-DE998-U.fm]
18 US
model name1[STR-DE998]
[2-580-804-11(1)]
You can use the SPEAKER SET UP menu to set
the size, distance and location of the speakers
connected to this receiver.
1
Press ?/1 to turn on the receiver.
2
Press MAIN MENU repeatedly to select
“
SET UP ”.
3
Turn MENU to select the parameter you
want to adjust.
For details, see “SPEAKER SET UP menu
parameters” below.
Note
Some speaker setup items may appear dimmed in
the display. This means that they have been
adjusted automatically due to other speaker
settings or may not be adjustable.
4
Turn –/+ to select the setting you want.
The setting is entered automatically.
5
Repeat steps 3 and 4 until you have set
all of the items that follow.
SPEAKER SET UP menu
parameters
The initial settings are underlined.
x EASY SETUP XXX (Speaker easy setup)
• YES
If you want to set up your speakers
automatically, select “YES”. You can select a
pre-defined speaker pattern (see the supplied
“Easy Setup Guide”).
• NO
If you want to adjust the settings of each
speaker manually, select “NO”.
x SP PATTERN X–X
(Speaker setup pattern)
When “EASY SETUP” is set to “YES”, select
the speaker setup pattern. Turn –/+ to select the
speaker setup pattern and press ENTER to enter
the selection. Check your speaker setup pattern
using the supplied “Easy Setup Guide”.
x SUB WOOFER XXX
(Sub woofer selection)
• YES
If you connect a sub woofer, select “YES”.
• NO
If you did not connect a sub woofer, select
“NO”. The front speakers are automatically
set to “LARGE” and you cannot change this
setting. This activates the bass redirection
circuitry and outputs the LFE signals from
other speakers.
• In order to take full advantage of the Dolby
Digital bass redirection circuitry, we
recommend that you set the cut off frequency
on the sub woofer as high as possible.
x FRONT SP XXXXX
(Front speakers size)
• LARGE
If you connect large speakers that will
effectively reproduce bass frequencies, select
“LARGE”. Normally, select “LARGE”.
• SMALL
If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select “SMALL” to activate
the bass redirection circuitry and output the
front channel bass frequencies from the sub
woofer. When the front speakers are set to
“SMALL”, the center, surround and surround
back speakers are also automatically set to
“SMALL” (unless previously set to “NO” or
to “ZONE-2”*).
* For surround back speakers only.
x CTR SP XXXXX
(Center speaker size)
• LARGE
If you connect a large speaker that will
effectively reproduce bass frequencies, select
“LARGE”. Normally, select “LARGE”.
However, if the front speakers are set to
“SMALL”, you cannot set the center speaker
to “LARGE”.
• SMALL
If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select “SMALL” to activate
the bass redirection circuitry and output the
center channel bass frequencies from the front
speakers (if set to “LARGE”) or sub woofer.
a)
5: Setting up the speakers
GB01COV_STR-DE998-U.book Page 18 Monday, January 17, 2005 2:49 PM