Sony STR-DE998 - Manual (Page 44)

masterpage:Left
lename[E:\SEM_Janet\Data_DE998\J9041624_2580804111DE998U\2580804111\GB070TH_
STR-DE998-U.fm]
44 US
model name1[STR-DE998]
[2-580-804-11(1)]
Tips
• Even when this receiver is turned off, the receiver in
the 2nd zone remains turned on. To turn off all
receivers, press ?/1 and AV ?/1 on the remote at
the same time (SYSTEM STANDBY).
• Only signals from components connected to the
analog input jacks are output through the 2ND ZONE
OUT jacks. No signals are output from components
connected to only the digital input jacks.
• When “SOURCE” is selected, the signals input to the
MULTI CH IN jacks are not output from the 2ND
ZONE OUT jacks even when MULTI CH IN is
selected. The analog audio signals of the current
input are output.
2nd zone connections
Using the surround back
speakers for 2nd zone
Make sure that the surround back speakers
selection parameter is set to “ZONE-2”
(page 19).
Use the remote for the following operation.
1
Hold down RM SET UP and press ?/1.
2
Move the Easy scroll key (PUSH) to
select “2ND”.
3
Press PUSH.
“2ND” appears in the remote display.
4
Move the Easy scroll key (PUSH) to
select the analog signals you want to
output (e.g. TUNER).
5
Press PUSH.
Your selection (e.g. ZONE-2 TUNER)
appears in the display.
6
Press MASTER VOL +/– to adjust the
volume of your speakers in the 2nd
zone.
Tips
• Press ?/1 on the remote while “2ND” appears in the
remote display to turn off 2nd zone.
• To turn off the receiver, make sure that you select
“MAIN” in step 2 above. “2ND” disappears from the
remote display. Then, press ?/1 to turn off the
receiver.
• You can use MUTING on the remote to mute the
sound.
2ND
ZONE
OUT
STR-DE998
Main receiver
Audio/video components
2nd zone
Speaker Speaker
Amplifier/Receiver
GB01COV_STR-DE998-U.book Page 44 Monday, January 17, 2005 2:49 PM