Sanyo DP42545 - Manual (Page 13)

13
Connecting Audio Out Jacks to a Stereo Amplifier
Switch off TV and external equipment before connecting
cables.
(Cables are not supplied.)
VIDEO 1
(MONO)
AUDIO
R R
L
V
L
S-VIDEO
AUDIO
OUTPUT
Stereo Amplifier
ANALOG AUDIO OUTPUT CONNECTIONS
1 Connect the TV Audio Out (R/L) to a Stereo Amplifier
In (R/L).
2 Press the POWER key to turn on the TV, then turn on
your external equipment.
NOTES: Do not connect external speakers directly to the TV.
When TV Speaker is in the ON mode, sound will be
reproduced through your TV and the stereo amplifier.
When TV Speaker is in the OFF mode, sound will be
reproduced only through the stereo amplifier. (See page
25 to set
TV Speaker.)
What you will need
for connections:
Audio Cable – 1
1
TV Back
1 1 2 3
POWER
INPUT
1 2 3
Remote Control
2
TYPICAL HOME THEATER CONNECTIONS