Sanyo DP42545 - Manual (Page 20)

20
Initial Channel (Analog Only)
This television can be programmed to
tune to your favorite analog channel
each time it is powered on.
1 Press the TUNER key to select
the Analog tuner.
2 Press the MENU key to display
the Main menu.
3 Use the CURSOR
▲▼ keys to
highlight the Channel category.
Press ENTER.
4 Use the CURSOR ▲▼ keys to
highlight the Initial Channel
option. Press ENTER.
5 Use the CURSOR ▼ key to
select On. Press ENTER .
6 Use the CHANNEL
▲▼ keys or
numerical keys to select the
desired analog channel.
7 Press the ENTER key to set the
initial channel. Press the EXIT key
to return to normal TV viewing.
NOTE: If the TV is powered Off while
any video mode is selected, that
video mode will be tuned when
the TV is powered On again
(Video 1, Component 2, or Com-
ponent 3).
➠
Analog Channel Scan Memory
Analog Channel Scan Memory is a
database of active channels that you
scan through using the CHANNEL
SCAN
▲▼ keys. This list can be cus-
tomized by deleting and/or adding
digital channels.
1 Press the TUNER key to select
the Analog tuner.
2 Press the MENU key to display
the Main menu.
3 Use the CURSOR
▲▼ keys to
highlight the Channel category.
Press ENTER.
4 Use the CURSOR ▲▼ keys to
highlight the Channel Scan
Memory option. Press ENTER.
“Add?” will appear below the channel
number if the selected channel is not
in the database. “Delete?” will
appear below the channel number if
the selected channel is already in the
database.
5 Use the CHANNEL
▲▼ keys or
numerical keys to select desired
channel.
6 Press the ENTER key to delete or
add the channel.
7 When you have finished adding
and / or deleting channels, press
the EXIT key to return to normal
TV viewing.
■ If the last remaining analog channel
is deleted (cable channel or off-air
channel) ALL analog channels (cable
or off-air) will be restored automati-
cally, regardless of the previous
Analog Channel Scan Memory data-
base.
➠
CHANNEL SETUP OPTIONS (CONTINUED)