Sanyo DP42545 User Manual
Page 17
17
Channel Search
Use Channel Search to replace the
existing Digital and Analog Channel
Scan databases, such as, if you move
to another city.
NOTES: To receive Digital Cable channels,
you have to perform a Digital
Cable Search.
To add new Digital channels to
the existing database, use
Digital
Add-on Search. See page 18.
1
Press the TUNER key to select
the Digital Tuner.
2
Press the MENU key to display
the Main menu.
3
Use the CURSOR
▲▼ keys to
highlight the
Channel category.
Press ENTER.
4
Use the CURSOR
▲▼ keys to
highlight the
Channel Search
option. Press ENTER.
5
Use the CURSOR
▼ key to
choose Yes. Press ENTER.
NOTE:
After Channel Search is com-
plete, the TV will tune to the
lowest Digital Cable channel (or
Digital D03 if no Digital channels
are found).
CHANNEL SETUP OPTIONS
➠
Channel Setup Options continued on next page.
Digital Cable Search
(
Optional
)
This Plasma TV can receive unscram-
bled (ClearQAM) Digital Cable
Channels, when available. However,
not all cable companies provide Clear-
QAM digital channels.
Searching for Digital Cable Channels
will take about 10 minutes, please be
patient.
Channel numbers will appear under
the progress bar only when a channel
is found.
IMPORTANT FACT: This TV maintains only
one database of digital channels. There-
fore, when you search for ClearQAM digital
cable channels, the database of digital
antenna channels will be deleted. You will
only be able to receive those ClearQAM
channels your cable company provides.
Cable companies rearrange virtual chan-
nels as programming changes, which may
cause the program you are watching to
move to another channel. This message
will appear on the screen briefly to notify
you of a change. You will have to relocate
the program you were watching by scan-
ning through the channels.
To restore the digital antenna channel
database, reconnect the antenna and use
the menu system to perform a normal
Channel Search.
1
Connect a Digital Cable signal
directly to the TV’s Digital Antenna
In terminal.
2
Press the TUNER key to select
the Digital Tuner.
3
Press the MENU key to display
the Main menu.
4
Use the CURSOR
▲▼ keys to
highlight the
Channel category.
Press ENTER.
5
Use the CURSOR
▲▼ keys to
highlight the
Digital Cable Search
option. Press ENTER.
6
Use the CURSOR
▼ key to
choose Yes. Press ENTER.
Program change from
cable company
DIGITAL
DIGITAL
ANTENNA IN
ANTENNA IN
DIGITAL
DIGITAL
AUDIO
AUDIO
OUTPUT
OUTPUT
UHF
UHF
Digital
Cable Signal
➠