Sanyo DP42545 - Manual (Page 15)

15
➆
Caption Key—Press to select analog or digital caption-
ing. The Analog Caption modes are: CC1, CC2, QuikCap
and OFF. The Digital Caption modes are: Digital
CC1~Digital CC6, QuikCap, and OFF. (See page 21.)
➇
Channel Scanning (CH
▲▼)—Press the CHANNEL
SCAN ▲▼ keys to tune to the next higher or lower
channel in the Channel Scan Memory database. The
scanning loop includes analog channels, digital chan-
nels, and all A / V inputs.
➈
Pix Shape Key—Use this key to change the video
display format. Available options depend on the signal
received and the broadcast’s aspect ratio. Options
include: Normal, Full, Zoom1, and Zoom2.
Factory preset modes: Analog antenna signal and all
Video inputs—FULL; Digital antenna signal—ZOOM2.
➉
Audio Key—Press to select the desired audio mode,
if available: Digital—Main, Sub1, Sub2, or Sub3;
Analog—Stereo, Mono, & SAP (antenna signals only).
Power key—Press this key to turn the TV on and off.
Sleep Key—Press this key, then press the “0” key to
set the Sleep Timer. The sleep timer can be set from
30 minutes up to 3 hours in 30 minutes increments.
The Sleep Timer will switch off the TV automatically.
(The Sleep Timer will be cancelled if the TV is turned
off or if a power failure occurs.)
Mute Key—Press once to minimize the volume. Press
again to restore.
This key will not mute sound from
the audio out jacks.
Enter key—Press this key to select an option from the
menu system, when required.
Cursor
▲ (Up) ▼ (Down) keys—Press these keys to
move the cursor up and down within the menu.
Cursor
(Left) (Right) keys—Press these keys to
move the cursor left and right within the menu.
Exit key—Press this key to exit from the menu
system.
Volume (VOL + –) Keys—Press the VOL + – keys to
adjust the volume. The screen displays Green left and
right arrows that turn Red and blink as many times as
you press the VOL + – keys.
▼ ▲
1
4 5 6
7 8
0
9
2 3
POWER
INPUT
INFO
RECALL
MENU
CAPTION EXIT
VOL
RESET AUDIO PIX SHAPE
CH
ENTER
TUNER MUTE
SLEEP
➉
12
13
14
11
➈
16
15
17
18
➇
15
14
11
12
13
16
17
Reset Key—Press twice to restore factory settings.
The TV will automatically start Channel Search and
clear all customized settings.
NOTE: The RESET Function includes a channel search.
Current Digital and Analog channel databases will be
deleted and new ones created by the Channel Search
process. To receive Digital Cable channels, see page 17
for Digital Cable Search.
These features will reset to factory defaults.
If desired, personal settings can be made again using the
menu options. (See page 27.)
• Picture / Sound Adjustments:
Color, Tint, Contrast, Bright-
ness, Sharpness, Color
Enhancer, Dynamic AI, Bass,
Treble, and Surround Sound
• Channel Memory—Digital
and Analog channel data-
bases will be replaced
• Initial Channel to OFF
• Analog Audio to Stereo
• Captioning to OFF
• V-Guide to OFF
• TV Speakers to ON
• Digital Audio Output to
Dolby ® Digital
• Menu Language to English
• Auto Clock (and Sleep Timer
if previously set)
• Any Video mode to TV mode
18
➀
➁
➂
➃
➄
➅
➆