Samsung VP-D200(i) - Manual (Page 42)

42
ENGLISH
Advanced Recording
42 42
ENGLISH DEUTSCH
● DEMONSTRATION
✤ Demonstration automatically shows you the major functions that are
included with your camcorder so that you may use them more
easily.
✤ The DEMONSTRATION function may only be used in the CAM
mode without a tape inserted in the camcorder.
✤ The demonstration operates repeatedly until the
DEMONSTRATION mode switched OFF.
1. Set the camcorder to CAM mode.
2. Press the MENU button.
■ The menu list will appear.
3. Move the MENU SELECTOR to highlight INITIAL.
4. Select DEMONSTRATION from the submenu and
push the MENU SELECTOR.
5. To activate the DEMONSTRATION,
set DEMONSTRATION ON.
■ Press the menu button to quit the menu.
■ The demonstration will begin.
6. To end the DEMONSTRATION,
set the DEMONSTRATION to OFF.
Notes
■ The DEMONSTRATION function only works without a
TAPE installed.
■ The DEMONSTRATION mode is automatically activated when the
camcorder is left idle for more than 10 minutes after switching to the
CAM mode (no tape is inserted in the camcorder).
■ If you press other buttons (FADE, BLC, PHOTO, EASY) during the
DEMONSTRATION mode, the DEMONSTRATION stops temporarily
and resumes 10 minutes later if you do not operate any other functions.
■ While setting the NIGHT CAPTURE to ON, the DEMONSTRATION
function does not work.
● DEMONSTRATION
✤
✤ DEMONSTRATION CAM
✤ DEMONSTRATION
OFF
1. CAM
2. MENU
■
3. MENU SELECTOR
INITIAL
4. DEMONSTRATION
MENU SELECTOR
5. DEMONSTRATION
DEMONSTRATION ON
■ MENU
■
6. DEMONSTRATION
DEMONSTRATION
OFF
■
DEMONSTRATION
■ CAM
10 DEMONSTRATION
■ DEMONSTRATION
FADE
BLC PHOTO EASY
DEMONSTRATION
10 DEMONSTRATION
■ NIGHT CAPTURE ON
DEMONSTRATION
CAM MODE
INITIAL CLOCK SET
WL. REMOTE
BEEP SOUND
SHUT. SOUND
DEMO
CAMERA
A/V
MEMORY
VIEWER
CAM MODE
INITIAL SET
CLOCK SET
WL.REMOTE
DEMONSTRATION
BEEP SOUND
SHUTTER SOUND