Samsung VP-D200(i) - Manual (Page 84)

[ VP-D230(i)/D250(i)/D270(i)]
84
ENGLISH
Inserting and ejecting the Memory Stick
● Inserting the Memory Stick
1. Turn the Power switch to OFF.
2. Insert the Memory Stick into the Memory Stick
slot located right side of the camcorder, in the
direction of the arrow.
● Ejecting the Memory Stick
1. Turn the Power switch to OFF.
2. Push the Memory Stick, then it comes out of the
camcorder automatically.
3. Pull out the Memory Stick.
✤ Do not attempt to pull the Memory Stick out
without first pushing it in.
Notes
■ If you set the camcorder to M.PLAY mode, the last
recorded still image appears.
-
If there are no recorded images on the Memory Stick, NO STORED
PHOTO! or NO STORED MPEG4! and
will display on the
screen.
■ Do not turn the power off while recording, loading, erasing or
formatting.
■ Please turn the power off before you insert or eject the Memory Stick.
You could lose data on the Memory Stick.
■ Do not allow metal substances to come in contact with the terminals of
the Memory Stick.
■ Do not bend, drop or apply strong shock to Memory Stick.
■ After pulling the Memory Stick out from the camcorder, please keep
the Memory Stick in a soft case to prevent static shock.
■ The stored contents may be changed or lost as a result of misuse, static
electricity, electric noise or repair.
Save important images separately.
■ Samsung is not responsible for data loss due to misuse.
ENGLISH
Digital Still Camera mode (VP-D230(i)/D250(i)/D270(i) only)
●
1.
2.
●
1.
OFF
2.
3.
✤
■
- NO STORED
PHOTO! NO STORED MPEG4!
■
■
■
■
■
■
■