Samsung VP-D200(i) - Manual (Page 54)

54
ENGLISH
54 54
ENGLISH DEUTSCH
Advanced Recording
● DATE/TIME
✤ The DATE/TIME function works in CAM, PLAYER, M.REC and
M.PLAY modes.
✤ The date and time are automatically recorded on a special data area of
the tape.
1. Press the MENU button.
■ The menu list will appear.
2. Move the MENU SELECTOR to highlight VIEWER
and push the MENU SELECTOR.
3. Move the MENU SELECTOR to highlight DATE/TIME.
4. Push the MENU SELECTOR to select the sub-menu.
5. Using the MENU SELECTOR, select the DATE/TIME
mode.
■ You can choose to display - the OFF, DATE, TIME,
DATE/TIME
-
OFF
- DATE only
- TIME only
- DATE & TIME
■ To return to the previous menu, highlight the
DATE/TIME in the middle of the menu list and
push the MENU SELECTOR.
6. To exit, press the MENU button.
Notes
■ The DATE/TIME is not affected by the OSD ON/OFF
(DISPLAY) button.
■ The DATE/TIME will read “- - -” in the following
conditions.
-
During playback of a blank section of a tape.
- If the tape was recorded before setting the DATE/TIME in the Camera’s
memory.
- When the lithium battery becomes weak or dead.
■ Before you use the DATE/TIME function, you must set the Clock.
See CLOCK SET on page 38.
● DATE/TIME /
✤ CAM PLAYER M.REC
M.PLAY DATE/TIME /
✤ DATE/TIME /
1. MENU
■
2. MENU SELECTOR VIEWER
MENU SELECTOR
3. MENU SELECTOR
DATE/TIME /
4. MENU SELECTOR
5. MENU SELECTOR
DATE/TIME /
■ OFF DATE
TIME DATE/TIME /
- OFF
- DATE
- TIME
- DATE TIME
■ DATE/TIME
/ MENU SELECTOR
6. MENU
■ DATE/TIME / /
DISPLAY
■ DATE/TIME /
- - -
-
-
DATE/TIME /
-
■ DATE/TIME /
38 CLOCK SET
CAM MODE
VIEWER SET
LCD ADJUST
DATE / TIME
TV DISPLAY
CAM MODE
INITIAL
LCD ADJUST
DATE / TIME
TV DISPLAY
CAMERA
A/V
MEMORY
VIEWER
CAM MODE
DATE / TIME
VIEWER SET
DATE
TIME
DATE&TIME