Siemens 54 - Manual (Page 24)

22
Configuring the Gigaset USB Adapter 54
Gigaset USB Adapter 54 / englisch / A31008-M1071-R101-1-7619 / configuration.fm / 04.12.2006
WPA-PSK / WPA2-PSK
WPA-PSK / WPA2-PSK offers greater protection for your network than WEP. You should
therefore use WPA-PSK / WPA2-PSK for registration if all components in your network
support this.
WPA-PSK or WPA2-PSK can be used with various encryption standards. Depending on
which standard the access point supports, the encryption mode is automatically
selected. In the Encryption field, Auto cannot be changed.
ì In the Pre-shared Key (PSK) field, enter the key you would like to use for registration
on the network.
Note that all components in a network must use the same Pre-shared Key (PSK)
to be able to communicate with each other.
If you would like to register on a network in Infrastructure mode, first define a Pre-
Shared Key (PSK) on your wireless router for your network. Then use this for all remain-
ing components in your network. You can find more information in the user manual for
your wireless router.
ì Click on Apply to apply the settings.