Siemens 54 - Manual (Page 27)

25
Configuring the Gigaset USB Adapter 54
Gigaset USB Adapter 54 / englisch / A31008-M1071-R101-1-7619 / configuration.fm / 04.12.2006
Configuration – Profiles
Selecting profiles
The Gigaset WLAN Adapter Monitor can manage several configuration profiles for your
Gigaset USB Adapter 54. If you want to use your PC in different wireless networks, for
example, you can create several profiles and adjust them to the requirements of the
corresponding networks. When changing networks, you only have to choose the
appropriate profile for registering your PC in the new network.
The Gigaset USB Adapter 54 always uses the settings for the profile displayed in the
Profile field.
Creating a profile
ì Click on New next to the field Profile.
This opens a dialogue for entering a profile name.
ì Enter a name for the new profile and confirm your entry with OK. The maximum
length of the profile name is 29 characters.
The valid settings are still shown.
ì Adjust the settings to the requirements of the network environment.
ì Click on Save.
This saves your configuration as a new profile. The selection in the Profile field is
expanded to include the new profile name.
Note:
After installation, the DEFAULT profile contains common settings.
Please remember:
To make it easier to recognise them again, it is advisable to use an "illustrative"
name for the profiles. A suitable name for a profile could be the location of the
wireless network.