Siemens 300 User Manual
Page 14
14
Installing the Gigaset USB Adapter 300
Gigaset USB Adapter 300 / multilanguage / A31008-M1066-R101-2x-7619 / installation.fm / 14.11.2008
Sc
hablone 200
4_12
_27
u
You can connect the Gigaset USB
Adapter 300 to a free USB port on your
PC via the USB cable supplied.
u
To optimally adjust the Gigaset USB
Adapter 300 for operation in a fixed
location you can install it with the
supplied stand.
Operating the Gigaset USB Adapter 300 with the stand
ì
Open the stand. To do this, pull the front of the
stand about 2 mm upwards (1) and then
remove it forwards (2).
ì
Push the USB cable from below through the
stand (3).
ì
Press the USB plug between the fixtures in the
direction of the arrow. Make sure that the logo
on the plug is pointing forward (4).
ì
Close the stand. Make sure that the clamps on
the front of the stand snap in (5).
ì
Pass the cable through the channel in the bot-
tom and insert it in a free USB port on your PC
(6).
1
2
3
4
5
6