Siemens 300 - Manual (Page 38)

38
Configuring the Gigaset USB Adapter 300
Gigaset USB Adapter 300 / multilanguage / A31008-M1066-R101-2x-7619 / configuration.fm / 14.11.2008
Sc
hablone 200
4_12
_27
SSID Shows the ID for the network environment.
(see "SSID (Service Set Identifier)" on page 28)
Network Mode Shows the structure of the network environment
(see "Network Mode" on page 29)
Transmission Rate Shows the current transmission rate in Mbps.
Channel Shows the channel used for radio transmission
(see "Channel" on page 29)
Transmission Mode Shows the WLAN standard used for data transmission
(see "Transmission mode" on page 30).
If your PC runs with Windows Vista mode, the transmission
mode 802.11n may not be displayed, depending on the type of
access point in your wireless network.
Security Shows the encryption method
(see "Configuration – Security" on page 31)
Received Packets Shows how many data packets have been received on your PC
from connection partners in the current WLAN since the con-
nection was set up.
Sent Packets Shows how many data packets have been sent to connection
partners in the current WLAN from your PC since the connec-
tion was set up.
Link Quality Shows the quality of the wireless connection.
The graphic display of the connection quality is supported with
a percentage figure and an evaluation of the signal
(Excellent, Good, Fair, Poor).
Signal Strength Shows the strength of the radio signal in the wireless connec-
tion.
The graphic display of the signal strength is supported with
a percentage figure and an evaluation of the signal
(Excellent, Good, Fair, Poor).