Siemens 300 - Manual (Page 26)

26
Configuring the Gigaset USB Adapter 300
Gigaset USB Adapter 300 / multilanguage / A31008-M1066-R101-2x-7619 / configuration.fm / 14.11.2008
Sc
hablone 200
4_12
_27
The Status tab displays the configured data if the connection was successfully estab-
lished within two minutes.
There is no need for further settings. However, you may adapt the values for Sending
Power and Power Saving on the Configuration– Common tab to your situation (see
page 30). The fields in the Status window are described on page 37.
The security settings are saved in the client after successful connection to the access
point. The security settings and the settings for data traffic are available in the default
profile the next time the Gigaset WLAN Adapter Monitor is started.
If the connection to the access point could not be established within two minutes, all
fields in the Status window remain empty. Check whether the Registration Mode you
have chosen corresponds with the setting on the access point and restart the registra-
tion on the access point (see page 21).