Savin SDC410 User Manual

Page 47

Advertising
background image

32

Setting a Stack of Originals in the Document Feeder

You can insert a stack of originals into the document feeder. These originals are individually fed onto and
removed from the exposure glass (platen glass).

Note

❐

Some originals are unsuitable for the document feeder.

☛

See page 30.

❐

Do not press down or hold originals after inserting them.

❐

While originals are fed from the original table to the exposure glass (platen glass), do not pull them out.

❐

Do not lift the document feeder until the original has been completely fed out.

1

Correct any curl, fold, or crease in the originals
before setting the originals.

2

Make sure the Insert Original indicator is lit and
the exposure glass (platen glass) is clear of origi-
nals.

3

Adjust the guide to the original size.

4

Set the originals

face up into the document

feeder until the Insert Original indicator goes
off.

Note

❐

The last page should be on the bottom.

❐

The original guide must touch the front side of the
originals.

❐

Do not stack originals above the limit mark.

Setting a Stack of Originals in the Document Feeder

TRSR050E

1: Limit mark
2: Original guide

2

1

Advertising