Savin SDC410 User Manual

Page 48

Advertising
background image

33

Basics

Setting one Original at a Time in the Document Feeder

If you set one original at a time in the document feeder, the second and subsequent originals can be fed and
copied automatically without pressing the Start key.

Note

❐

Do not press down or hold originals after inserting them.

❐

While originals are fed from the original table to the exposure glass (platen glass), do not pull them out.

❐

Do not lift the document feeder until the original has been completely fed out.

1

Correct any curl, fold, or crease in the originals
before setting.

2

Make sure the Insert Original indicator is lit and
the exposure glass (platen glass) is clear of origi-
nals.

3

Adjust the guide to the original size.

4

Set the original

face up into the document feeder

until the Insert Original indicator goes off.

Note

❐

If you are copying a stack of originals one sheet at a
time and you want to keep them in order, start with
the last page of the originals.

❐

The original guide must touch the front side of the
original.

5

Press the Start key.

6

While the Auto Feed indicator is lit after an origi-
nal is fed, set the next original. The original is
automatically fed and copied.

Note

❐

You can adjust the time the machine waits before
being ready for the next original with the user tools.

☛

See page 191.

Setting one Original at a Time in the Document Feeder

TRSR050E

Advertising