Setting non-standard sized originals – Savin SDC410 User Manual

Page 50

Advertising
background image

35

Basics

1

Select the copy paper size.

2

Press the [Custom Size Orig.] key.

3

Make sure that the [Orig. Horiz.] key is selected.
Enter the horizontal size with the Number keys,
then press the [#] key.

Note

❐

To change the value entered, press the [Clear] key
and enter a new value.

4

Press the [Orig. Vert.] key and enter the verti-
cal size with the Number keys, then press the
[#] key.

5

Press the [OK] key.

6

Set your original on the exposure glass (platen
glass), then press the Start key.

Setting Non-standard Sized Originals

When copying from non-standard sized originals, enter the original size so that copy is well aligned.

Limitation

❐

You must set your non-standard size originals on the exposure glass (platen glass).

Reference

For the standard sizes the machine can detect,

☛

see page 30.

Note

❐

The dimensions you can enter must be within the following ranges:

Setting Non-standard Sized Originals

Vertical size

Horizontal size

50 - 297mm (in 1mm steps), 2.0" - 11.7" (in 0.1" steps)

50 - 432mm (in 1mm steps), 2.0" - 17" (in 0.1" steps)

[Custom Size Orig.] key

Advertising