Savin SDC410 User Manual

Page 64

Advertising
background image

49

Copying

Basic Operation

Copying onto standard size paper with the bypass tray

Note

❐

When you copy onto the reverse side of paper that has been already copied onto,

☛

see page 52.

1

Open the bypass tray.

2

Press the [Normal Paper], [Thick], [Extra
Thick]
, or [OHP] key.

Note

❐

Make sure that the [Standard Size] key is selected.

❐

When you copy onto OHP transparencies, you can select whether a blank slip sheet is inserted between OHP
tranparencies.

3

Press the [OK] key.

4

Adjust the paper guides to the paper size.

Note

❐

Make sure that the paper guides matches to the pa-
per size. If the paper guides are not adjusted to the
paper size properly, paper might be skewed or a pa-
per misfeed might occur.

❐

With large copy paper (more than A4

l

, 8

1/2

"

×

11"

l

),

swing out the extender.

5

With the side you wish to copy onto face up, in-
sert the paper into the bypass tray until it stops.

Note

❐

The paper size is displayed.

1:Horizontal size
2:Vertical size
3:Extender
4:Paper guides

Advertising