Speco Technologies 4HD - Manual (Page 21)

21
Control the motion sensitivity from 1 to 9.
KEY TONE Enable/disable key tone.
REMOTE CONTROL ID Select an ID of remote control.
1. Select ID.
2. Press the same number as ID set in DVR on a remote
control.
3. Then icon will be displayed on Live screen of DVR that
respond to the remote control.
The options are from 00 to 99
SENSOR Select sensor NO from 1 to 4,9,16.
TYPE Set the type of sensor for the specified channel. Options are:
OFF, N/O (normal open), and N/C (normal closed).
3-4-1. Alarm-Out
Figure 3.4.2. ALARM-OUT Setup Screen
Table 3.4.2. Menu Item in ALARM-OUT Setup Screen
Item Description
ALARM OUT Select an alarm out number.
Available NO: 4CH(1)
SENSOR IN Enable setting up to 4 cameras for each alarm.
MOTION ON Enable setting up to 4 cameras for each alarm.
VIDEO LOSS ON Enable setting up to 4 cameras for each alarm.
ALARM DURATION Set the alarm dwell time from 5 to 60 seconds.
ERROR ALARM Set the error type for the alarm activation. The options are
OFF, ALL, HDD ERROR and VIDEO LOSS.
3-4-2 PTZ Setup
To control the PTZ functions of the camera, connect a controller to the RS-485 port.
①
Connect the RS-485 cables of PTZ camera to the RS-485 port on the rear panel.