Speco Technologies 4HD - Manual (Page 68)

68
10-5-2. Record
Select Record to set the recording conditions.
10-5-2-1. Common to All Channels
Resolution: Sets the resolution for the recordings. The set value applies to all channels.
10-5-2-2. Channel-Specific Settings
These settings apply to the specified channel only.
Channel Designation
Frame Rate: Sets the recording rate.
Quality: Sets the image quality in 5 levels.
Recording: Sets the recording mode.
Electronic Light control: Sets whether to perform or not the electronic light control
Sensor Recording: Sensor recording is performed when an external sensor signal is input to the specified
external sensor input terminal.
Pre Record: Sets whether to perform or not pre recording.