2-2. event search – Speco Technologies 4HD User Manual

Page 36

Advertising
background image

36

1. Select the date of the video to begin searching and navigate through the days using the control

button (

◀ ▲ ▶ ▼

).

2. Once you have selected the date, press the SEL button to move to the time line search window.

3. Use the control button (

◀ ▲ ▶ ▼

) to select a time zone on the 24 hours time table.

4. Select All or a specific channel to search video clip on the time line bar using the control button (

▲ ▶ ▼

).

6. Once you select the channel, use the control button (

◀ ▲ ▶ ▼

) to move to the point you wish to

start playing the video clip.

7. Once you have selected the time zone, press the SEL button to playback the recorded video.

8. Press the ESC to return to the SEARCH window.

5-2-2. Event Search

The Event Search window is used to find stored video. Three categories of search filters can be applied:

DATE, CHANNEL and TYPE. Press SEL to select a value and move down to the next category and use

the control button(

◀ ▲ ▶ ▼

) to move up to the categories you have previously entered. The ESC

button will return the user to the previous screen.

Figure 5.2.3. Event Search Screen

1. Select the date of the video to begin searching. Use the control button (

◀ ▲ ▶ ▼

) to navigate

through the days.

2. Once you have selected the date, press SEL to move to the CHANNEL selector.

3. Use the control button (

◀ ▲ ▶ ▼

) to change the channel selection from ALL to any of the

available channels.

4. Once you have selected the channel, press SEL to move to the TYPE selector.

5. Use the control button (

◀ ▲ ▶ ▼

) to change the type of recording to ALL, MOTION, SENSOR,

MANUAL, or CONTINUOUS.

Advertising