Speco Technologies 4HD - Manual (Page 31)

31
3-9. Setup - CONFIG Mode
Press the SETUP button and enter the password. The setup menu is displayed as picture below. Select
CONFIG icon and press SEL button to enter the setup menu item. Navigate through the menu items using
the control button (
◀ ▲ ▶ ▼
) and change the value of the menu item using the control button (
◀ ▲ ▶
▼
). To return to setup menu screen, press the ESC button
Figure 3.9.1. Config Setup Screen
Table 3.9.1. Config Setup
Item Description
SAVE SETUP
TO A USB
User can save the current configuration (Setting values) of DVR to the USB
flash drive. Put the USB stick on the front panel and press SEL to start the
saving process.
LOAD SETUP
FROM A USB
User can upload the configuration of DVR to another DVR using the USB
Flash drive. Put the USB stick on the front panel and press SEL to start the
loading process.
LOAD
DEFAULT
Select ON to reset the system to the default settings.
(The follow settings such as Language, DVR ID, Security User
Authentication, Security User P/W, Date format, DLS settings, Network
settings, HDD serial number, and HDD ERROR time will not be included.)
LOAD
FACTORY
DEFAULT
Select ON to reset the system to the factory default settings.