Sony 3-280-847-11(1) - Manual (Page 47)

47
R
e
co
rd
in
g/
Pl
ay
bac
k
1
Set [S.TRANS/F.MARK] of the
(CAMERA SET) menu to
[SHOT TRANSITION].
2
Press the SHOT TRANSITION/
FOCUS MARKING button C to
bring up the shot transition store
screen.
The STORE lamp turns on.
3
Press the A button to store the
settings in SHOT-A, or the B
button to store the settings in
SHOT-B.
b Notes
• The settings stored in SHOT-A or
SHOT-B will be erased when you set
the POWER switch to OFF.
4
Press the SHOT TRANSITION/
FOCUS MARKING button C
again to bring up the shot
transition check screen.
The CHECK lamp turns on.
Press the A button to check SHOT-A, or
the B button to check SHOT-B. The
image will be displayed with the
settings stored in the selected SHOT.
The focus, zoom, iris, gain, shutter
speed and white balance are
automatically adjusted to the stored
settings.
b Notes
• The settings do not shift to the stored
settings with the transition time set in
[TRANS TIME] (p. 46).
5
Press SHOT TRANSITION/FOCUS
MARKING button C again to
bring up the shot transition
execution screen.
The EXEC lamp turns on.
6
Press the REC START/STOP
button A (or B) .
Press the A button for recording with
SHOT-A, or the B button for recording
with SHOT-B.
The settings shift from the current ones
to the stored ones.
b Notes
• When you change [SHOT TRANSITION]
(p. 46), press the SHOT TRANSITION/FOCUS
MARKING button repeatedly to exit the shot
transition screen.
• You cannot return from the stored SHOT-A or
SHOT-B settings to previous settings after you
execute the shot transition during recording.
STORE
SHOT
A B
TRANSITION/FOCUS MARKING
EXEC
CHECK
A
B
C
A button
B button
Continued ,