Sony 3-280-847-11(1) - Manual (Page 88)

88
from your camcorders when
synchronization is completed. You can
record with the synchronized time codes
using those camcorders.
b Notes
• If you want to execute [TC LINK] for more than
two camcorders, repeat the steps for multiple
sub camcorders with one main camcorder.
• Some frame shifting may occur over time after
time code synchronization.
• Some frame shifting may occur if you turn the
power off and back on. In such a case, set [TC
LINK] again.
B OFF
Does not save the actual time in the user
bit code.
ON
Saves the actual time in the user bit code.
You can save the date and time set in your
camcorder in the user bit and time code,
respectively, when you do this function.
b Notes
• This function is available in the following cases:
– [TC MAKE] : [PRESET]
– [TC RUN] : [FREE RUN]
– [UB TIME REC] : [OFF]
• The time lag may occur between the set time
code and the actual time as time goes on. Do
[UB-DATE/TC-TIME] again prior to recording.
• The date saved in the user bit will not be
automatically updated even when the actual date
has been changed.
UB TIME REC
UB-DATE/TC-TIME
(MEMORY SET)
menu
Settings for the “Memory Stick Duo” (ALL
ERASE/FORMAT, etc.)
The default settings are marked with B.
The indicators in parentheses appear when
the items are selected.
See page 63 for details on selecting
menu items.
You can delete all the still images without
image protection on a “Memory Stick Duo”
or in the selected folder.
1 Select [ALL FILES] or [CURRENT
FLDR].
[ALL FILES]: Deletes all the images on
the “Memory Stick Duo.”
[CURRENT FLDR]: Deletes all the
images in the currently selected folder.
2 Select [YES] t [YES] with the SEL/
PUSH EXEC dial.
[
Erasing all data...] appears.
[Completed.] appears when all unprotected
images are deleted.
b Notes
• Release the write protect tab on the “Memory
Stick Duo” beforehand for the “Memory Stick
Duo” with the write-protect tab (p. 118).
• The folder will not be deleted even when you
delete all the images in the folder.
• Do not do any of the following while [
Erasing all data...] is displayed:
– Operate the POWER switch/buttons.
– Eject the “Memory Stick Duo.”
Press the MENU button t select the
(MEMORY SET) with the SEL/PUSH
EXEC dial.
ALL ERASE
Press the MENU button t select the
(TC/UB SET) with the SEL/PUSH EXEC
dial.