Sony 3-280-847-11(1) - Manual (Page 53)

53
R
e
co
rd
in
g/
Pl
ay
bac
k
Changing/checking the settings in your
camcorder
You can turn on and off the display of the
time code, tape counter, and other
information on the screen.
Press the DISPLAY/BATT INFO
button A.
The screen indicators turn on (displayed)
and off (not displayed) as you press the
button.
When the POWER switch is set to
CAMERA, the screen changes (detailed
display
t simple display t no display) as
you press the button.
z Tips
• You can display the screen indicators during
playback on a TV. Select [V-OUT/PANEL] of
[DISP OUTPUT] (p. 82).
• When you assign [DISPLAY] of [ASSIGN
BTN] to an ASSIGN button, you can use the
ASSIGN button to change the screen.
You can display information, including
date, time and camera data, automatically
stored during recording on the screen
during playback.
1
Set the POWER switch E to VCR.
2
Press the DATA CODE button B
during playback or pause.
The screen changes (date and time
display
t camera data display t no
display) as you press the button.
A SteadyShot off
B Exposure
appears during playback of the
movie recorded with the iris, gain and
shutter speed automatically adjusted.
appears during playback of the
movie recorded with the iris, gain and
shutter speed manually adjusted.
Changing the screen
SEL / PUSH EXEC
MENU PROFILE
PICTURE
CHECK
STATUS
TC/U-BIT DATA CODE
A
E D
B
C
Displaying recording data (Data
code)
Continued ,