Sony 3-280-847-11(1) - Manual (Page 92)

92
B OFF
Does not superimpose the date and time on
images.
ON
Superimposes the date and time on images.
z Tips
• When [DV WIDE REC] is set to [OFF], the date
and time are displayed outside the 4:3 area but
properly recorded on images.
• When you record in the HDV format, the date
and time are displayed at different positions
during recording and playback.
B OFF
Cancels the melody.
ON
Activates a melody when you start/stop
recording.
When you set this function to [OFF], you
can turns off the front camera recording
lamp during recording. The default setting
is [ON].
When you set this function to [OFF], you
can turns off the rear camera recording
lamp during recording. The default setting
is [ON].
When you set this function to [ON], you
can use the supplied Remote Commander
(p. 135). The default setting is [ON].
z Tips
• Set to [OFF] to prevent your camcorder from
responding to a command sent by another VCR
remote control unit.
You can display the cumulative operation
time of your camcorder with the total hours
of operation, drum rotation, tape running, or
the total number of tape unthreading
operations.
OPERATION
Displays the total hours of operation in 10-
hour increments.
DRUM RUN
Displays the total hours of drum rotation in
10-hour increments.
TAPE RUN
Displays the total hours of tape running in
10-hour increments.
THREADING
Displays the total number of tape
unthreading operation in 10-operation
increments.
DATE REC
BEEP
REC LAMP[F] (Recording lamp
[front])
REC LAMP[R] (Recording lamp
[rear])
REMOTE CTRL (Remote control)
HOURS METER
Press the MENU button t select the (OTHERS) with the SEL/PUSH EXEC dial.