Sony PCV-MXS10 User Manual
Page 43
Troubleshooting
43
6
Follow the onscreen instructions to resolve the problem.
Topic: How do I change my modem to rotary or Touch-Tone dialing?
1
Click Start in the Windows taskbar, then click Control Panel.
2
Click Printers and Other Hardware, then click Phone and Modem options.
3
From the Dialing Rules tab, click Edit.
The Edit Location dialog box appears.
4
Select the Tone or Pulse option. Click OK.
Topic: My microphone does not work.
Check that the microphone is plugged into the Microphone jack.
Topic: My microphone is too sensitive to background noise.
If you find there is too much background noise when you record sound, you
should adjust the microphone gain by following these steps:
1
Click Start in the Windows taskbar, then click Control Panel.
2
Click Sounds, Speech, and Audio Devices, then click Sounds and Audio
Devices.
3
From the Audio tab, locate the Sound recording section and click the Volume
button.
The Recording Control dialog box appears.
4
Select the Options menu and click Properties.
The Properties dialog box appears.
5
In the section, “Adjust volume for,” select the Recording option. Click OK.
6
From the Recording Control dialog box, decrease the microphone volume
level by moving the slider bar down.
7
Close the Recording Control dialog box and then close the Sounds and
Audio Devices Properties window.
✍
You may need to reinstall the modem drivers. See “To Use the Driver Recovery CD”
for more information.